固相萃取净化-离子色谱测定不同生长期新鲜烟叶中的7种无机阴离子

目的 为了研究不同生长期新鲜烟叶中无机阴离子的含量和变换规律,建立了一种固相萃取净化/离子色谱方法测定新鲜烟叶中的7种无机阴离子（F-,Cl-,Br-,NO2-,NO3-,SO42-,PO43-）。方法 样品经0.1 mol/L NaOH水溶液超声提取,萃取液经RP1.0cc固相萃取柱净化后,使用AS11-HC（4 mm×250 mm）色谱柱进行分离,以KOH为流动相,梯度洗脱。 结果 7种无机阴离子在0.10-5.0 μg/mL范围内具有较好的线性（r>0.996）,检出限在0.01-0.04 μg/mL之间,定量限在0.04-0.14 μg/mL之间,加标回收率为96.3%～102.1%,相对标准偏差（RSD%）在2.7%~4.8%之间。结论 方法前处理操作简单,7种无机阴离子分离好,检测灵敏准确,可用于不同生长时期新鲜烟叶样品中多种无机阴离子含量的检测分析。     

Investigation of 500 keV Si ion induced surface structuring of Ni and Ti for enhancement of field emission properties

The present paper reports the investigation of surface morphology, elemental composition, phase changes and field emission properties of Si ion irradiated nickel (Ni) and titanium (Ti). The Ni and Ti targets have been irradiated with 500 keV Si ions generated by Pelletron accelerator at various fluences ranging from 6.9 × 10¹³ to 77.1 × 10¹³ ions/cm². Stopping range of ions in matter analysis revealed higher values of electronic stopping and sputtering yield for Ni as compared with Ti. For both irradiated metals, electronic energy loss dominant over the nuclear stopping. The growth of induced surface structures have been analysed by using field emission scanning electron microscopy (FESEM) analysis. In case of Ni, as the ion fluence increases from 6.9 × 10¹³ to 65.8 × 10¹³ ions/cm², the formation of spherical particulates, agglomers and sputtering is observed. Although in the case of Ti, with the increase of Si ion fluence from 11.6 × 10¹³ to 77.1 × 10¹³ ions/cm², the formation of irregular-shaped particulates along with crater and sputtered channels is observed. X-ray diffraction (XRD) analysis shows that no new phase is identified. However, a significant increase in peak intensity is observed with increasing ion fluence. The variation in crystallite size and dislocation line density is also observed as a function of Si ion fluence. Fourier transform infrared spectroscopy analysis shows that no bands are formed after the Si ion irradiation. Field emission properties of ion-structured Ni and Ti are well correlated with the growth of surface structures observed by SEM and dislocation line density evaluated by XRD analysis.     

Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.     

电场下离子型聚合物复合囊泡结构变化的分子动力学模拟

利用粗粒化分子动力学模拟研究了电场作用下离子型聚合物复合囊泡形变与破裂的过程.定量分析了囊泡破裂过程中的结构变化,包括囊泡的形变程度、破裂速度、组分分布以及破裂后的结构.研究表明,电场强度较弱时,囊泡表面所吸附的聚电解质首先脱落,囊泡由球形结构转变为椭球结构.随着电场强度增大,离聚物的离子侧基发生重新排布,囊泡表面电荷的有序结构被破坏,导致囊泡的结构无法维持而破裂,囊泡塌缩,分裂形成离聚物团簇,并进一步破裂为小尺寸的离聚物聚集体,均匀分散于溶液中.本文利用分子动力学模拟明确了电场中离子型高分子复合囊泡破裂过程的分子机理,为药物释放技术的优化及发展提供了理论支持.     

大学基础化学教学中的知其所以然*

针对大学本科一年级基础化学如“化学概论”等课程教学中,学生对于不断出现的专业名词及物理化学含义的理解问题,以“焓”“熵”等外来词汇以及角动量l、能级分裂单位“Dq”等缩写为例,从专业名词来源开始讲解,使学生在学习过程中既知其然又知其所以然,更好地理解化学专业词汇,尤其是外来词汇的内涵与物理化学意义。     

低功率超声增强碘帕醇氯氧化的效果和路径

研究了低功率超声(US, <38 W)对NaClO氧化非离子型碘代X射线造影剂—碘帕醇(IPM)的增强作用及机理, 考察了NaClO添加浓度和超声功率的影响, 分析并计算了体系中的主要活性物种及其贡献. 采用高效液相色谱/串联质谱(HPLC/MS/MS)对降解产物进行分析, 推测IPM的降解路径. 结果表明, 低功率US显著增强了NaClO对IPM的氧化效果, 在25 ℃, pH=5.8, NaClO浓度为0.12 mmol/L条件下, 10 mg/L IPM在60 min的降解率达到85.8%. 其中NaClO氧化、 HO·和活性氯自由基(RCSs)是US/NaClO增强IPM降解的主要原因, 自由基分析计算它们的贡献率分别为15.82%, 4.65%和79.53%. NaClO浓度在0~0.24 mmol/L范围内, IPM的降解率随NaClO浓度升高而增加, 60 min后降解率由4.75%增加到91.12%; 超声功率为28.5 W, 降解率达到最高. 在 15~45 ℃温度范围内, IPM的降解过程符合表观一级反应动力学, 反应活化能(E_a)为59.03 kJ/mol. HPLC/MS/MS共检测出5种中间产物, 结合密度泛函理论(DFT)计算结果, 初步推测了IPM在US/NaClO体系中的降解途径和机理.     

理论研究晶体场效应和电荷转移效应对Co2+的2p电子X射线L2,3吸收边光谱的影响

运用多重态计算方法研究了在正八面体对称性的晶体场中Co²⁺离子的2p电子X射线L_2,3吸收边光谱, 研究了Co²⁺离子和周围的配位离子之间的正八面体(O_h)晶体场效应和相应的电荷转移效应对于吸收光谱的影响. 系统讨论了在多重态计算中起作用的所有物理参数对CoO和CoCl₂的X射线吸收光谱特性的特定影响及其物理机制. 将计算得出的光谱数据和同样具有O_h对称性结构Co²⁺离子的CoO和CoCl₂实验光谱数据进行了对比, 在实验光谱数据中发现的特征被确定为来自不同自旋态, 并且光谱强度的变化与晶体场的强度相关, 揭示了其中包含的电荷转移效应. 本文为低对称性复杂系统的多重态计算提供了一个基础的参考标准, 可以适用于含有钴元素或其它过渡金属的复杂体系的X射线吸收光谱的理论计算.     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体。DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展。研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能。本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料的DNA生物传感器的最新进展,最后展望了DNA生物传感器的应用前景。     

Modeling of Solute-Solvent Interactions Using an External Electric Field—From Tautomeric Equilibrium in Nonpolar Solvents to the Dissociation of Alkali Metal Halides

An implicit account of the solvent effect can be carried out using traditional static quantum chemistry calculations by applying an external electric field to the studied molecular system. This approach allows one to distinguish between the effects of the macroscopic reaction field of the solvent and specific solute–solvent interactions. In this study, we report on the dependence of the simulation results on the use of the polarizable continuum approximation and on the importance of the solvent effect in nonpolar solvents. The latter was demonstrated using experimental data on tautomeric equilibria between the pyridone and hydroxypyridine forms of 2,6-di-tert-butyl-4-hydroxy-pyridine in cyclohexane and chloroform.     

1,3,5-Triaza-7-Phosphaadamantane (PTA) as a 31P NMR Probe for Organometallic Transition Metal Complexes in Solution

Due to the rigid structure of 1,3,5-triaza-7-phosphaadamantane (PTA), its ³¹P chemical shift solely depends on non-covalent interactions in which the molecule is involved. The maximum range of change caused by the most common of these, hydrogen bonding, is only 6 ppm, because the active site is one of the PTA nitrogen atoms. In contrast, when the PTA phosphorus atom is coordinated to a metal, the range of change exceeds 100 ppm. This feature can be used to support or reject specific structural models of organometallic transition metal complexes in solution by comparing the experimental and Density Functional Theory (DFT) calculated values of this ³¹P chemical shift. This approach has been tested on a variety of the metals of groups 8–12 and molecular structures. General recommendations for appropriate basis sets are reported.